Account
Menu
$86.14 – $101.41
ER625 is a nickel-chromium-molybdenum filler metal used for MIG, TIG, submerged arc and plasma arc welding of Inconel® alloys 601, 625 and 690 as well as Incoloy® alloys 800, 825 and 800HT to themselves or to each other. Washington Alloy 625 is excellent for joining these Inconel® and Incoloy® alloys to dissimilar metals such as carbon steel, low alloy steel, ferritic and austenitic stainless steels. This filler metal produces weld deposits with excel lent corrosion and oxidation resistance against phosphoric acids, organic acids and seawater. Good resistance against pitting and stress corrosion cracking in chloride containing environments. The weld deposits exhibit high strength and fatigue resistance over a broad range of temperatures ranging from cryogenic up to 1800°F. ER625 is most commonly used in the chemical processing industry, pollution control equipment, marine equipment, nuclear reactor components, pump shafts.
Your orders are shipped seamlessly between countries
You have the right to return your orders within 30 days.
Your payments are secure with our private security network.
ER625 is a nickel-chromium-molybdenum filler metal used for MIG, TIG, submerged arc and plasma arc welding of Inconel® alloys 601, 625 and 690 as well as Incoloy® alloys 800, 825 and 800HT to themselves or to each other. Washington Alloy 625 is excellent for joining these Inconel® and Incoloy® alloys to dissimilar metals such as carbon steel, low alloy steel, ferritic and austenitic stainless steels. This filler metal produces weld deposits with excel lent corrosion and oxidation resistance against phosphoric acids, organic acids and seawater. Good resistance against pitting and stress corrosion cracking in chloride containing environments. The weld deposits exhibit high strength and fatigue resistance over a broad range of temperatures ranging from cryogenic up to 1800°F. ER625 is most commonly used in the chemical processing industry, pollution control equipment, marine equipment, nuclear reactor components, pump shafts.
TYPICAL WELD METAL CHEMISTRY (%)
| Ni | 58.0 min. |
| C | 0.10 max. |
| Mn | 0.50 max. |
| Fe | 5.0 max. |
| S | 0.015 max. |
| Cu | 0.50 max. |
| Ti | 0.40 max. |
| Cr | 20.0-23.0 |
| *Cb | 3.15-4.15 |
| Mo | 8.0-10.0 |
| Si | 0.50 max. |
| P | 0.02 max. |
| Al | 0.40 max. |
| Others (total) | 0.50 max. |
‘Includes Tantalum (Ta)
MINIMUM MECHANICAL PROPERTIES (as welded)
| Ultimate tensile strength (psi) | 110,000 |
| Yield strength (0.2% offset) (psi) | 60,000 |
| Elongation in 2″ (%) | 30 |
| Wire Diameter | .035, .045 |
|---|
100% Original product that covered warranty by the vendor.
You have the right to return your orders within 30 days.
Your orders are shipped seamlessly between countries
Your payments are secure with our private security network.
Welding and Fabricating Accessories
FURICKCUP/Dog Fabrication
137 Cedar Pointe Dr
Suite C
Mooresville, NC 28117
